A fragrance supplier's safety data sheet mentions "a substance on the Candidate List", or a shop asks you to sign a form saying your candles are "SVHC-free". Two questions follow: is something wrong with the candle, and what do you actually have to do? Usually less than compliance newsletters suggest. The answer depends on a distinction most candle makers never think about: which part of a candle is an article and which part is a mixture.

What an SVHC is

A substance of very high concern (SVHC) is a substance that meets one of the criteria in Article 57 of REACH:

  • Carcinogenic, mutagenic or toxic for reproduction, category 1A or 1B.
  • Persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB).
  • Of "equivalent concern", such as some endocrine disruptors.

Once ECHA formally identifies a substance, it goes on the Candidate List (Article 59). The list passed 250 entries with its February 2026 update and grows once or twice a year. The duties start on the day a substance is added.

Being on the Candidate List is not a ban. It's an information trigger. A ban comes later, if the substance is moved to Annex XIV (authorisation, with a "sunset date" after which it can't be used without a permit) or restricted under Annex XVII.

Is a candle an article or a mixture?

REACH has different duties for mixtures and for articles, so this matters. ECHA's Guidance on requirements for substances in articles actually uses the candle as a worked example. It asks three questions. Would the wax make a flame without the wick? No. Does the wick deliver the wax to the flame in a controlled way? Yes. Is the wax used up during use? Yes. ECHA's conclusion: a candle is a combination of an article and a mixture, and you check the duties for each part separately.

In practice:

  • Pillar or taper candle: the wick is the article; the wax and fragrance are the mixture.
  • Container candle: the jar or tin, the lid and the wick are the article side; the wax and fragrance are still the mixture.
  • Reed diffuser: by the same logic, the bottle, cap and reeds hold and deliver a liquid mixture.
  • Wax melt: no wick and no vessel, so what you sell is essentially the mixture itself.

This is why the famous 0.1% article rules rarely touch your fragrance. They're measured against the article, and the fragrance lives in the mixture.

Which duties actually reach you

On the mixture side (fragrance oil, wax, the finished wax blend):

  • Suppliers of Candidate List substances, on their own or in mixtures, must give their business customers a safety data sheet. Section 3 of that SDS must name any Candidate List substance present at 0.1% or more, and ECHA says Section 15 should be updated to reflect SVHC status.
  • SVHC status adds no pictogram and no label line to your candle. The CLP label is still driven by hazard classification and concentration.
  • You don't need to hand a safety data sheet for your candles to consumers. If you do issue one, for example to a wholesale buyer, its Section 3 must list any Candidate List substance at 0.1% or more of the candle's wax.

On the article side (jar, tin, lid, wick, reeds), if a Candidate List substance is above 0.1% by weight of that article:

  • Article 33(1): you must pass on enough information for safe use to your business customers, at least the substance's name.
  • Article 33(2): a consumer who asks must get that information within 45 days.
  • SCIP: under the Waste Framework Directive, EU suppliers of such articles must notify ECHA's SCIP database.
  • Article 7(2) notification only applies above one tonne of the substance per year in your articles. That isn't a small-maker issue.

Where could the article side bite? Lead and lead monoxide are both on the list, so a lead crystal jar or a lid made of leaded brass is the kind of component worth asking about. For most glass jars, tins and cotton wicks the answer is simply "none above 0.1%".

Fragrance substances on the list

We checked the current list and ECHA's records on 29 September 2026. The entries a candle maker is most likely to meet:

  • BMHCA (Lilial), 2-(4-tert-butylbenzyl)propionaldehyde, EC 201-289-8: added on 8 July 2021 as toxic for reproduction. Its harmonised classification (index 605-041-00-3) is Repr. 1B, H360Fd, with no specific concentration limit. It also triggers separate CMR rules, covered in our post on the Lilial ban and CMR fragrance ingredients.
  • Musk xylene: one of the very first entries, in October 2008, as vPvB. It was then moved to Annex XIV with a sunset date of 21 August 2014. With no authorisation granted, it shouldn't appear in any fragrance supplied in the EU.
  • Phthalates: DEHP, DBP, BBP and DIBP are on the list. Diethyl phthalate (DEP), the one historically used in fragrance, is not. "Phthalate-free" is a buying preference, not a Candidate List requirement.

Not on the list at our check: galaxolide, tonalide, musk ketone and BHT. Galaxolide still carries a harmonised aquatic classification, so it can affect your label, but it isn't an SVHC. And the chlorinated paraffins on the list (short- and medium-chain) are industrial chemicals with nothing in common with candle paraffin wax.

A worked example

Say you still have an older fragrance oil whose SDS lists 1.5% BMHCA, and you use it at a 10% load in a container candle:

  • The oil holds 1.5% BMHCA, above the 0.3% generic limit for Repr. 1B. The oil itself is classified as toxic for reproduction with the signal word "Danger", and its SDS must show that and name BMHCA in Section 3.
  • The candle's wax holds 0.15%. That's under 0.3%, so BMHCA alone doesn't make the candle Repr. 1B. It is above 0.1%, so any SDS you issue for the candle must name it.
  • The jar and wick contain no BMHCA. No Article 33 duty and no SCIP notification come from this fragrance.

The paperwork outcome is milder than people fear. But the example also shows why the list is worth knowing: it flags ingredients that are on their way out. For BMHCA, the sensible move is to replace the oil, not to fine-tune the load.

What to ask your suppliers

  • Fragrance: "Does this oil contain any Candidate List substance at 0.1% or more? Which, and at what concentration?" Then check Section 3 and Section 15 of the SDS, and that its revision date is after the latest list update.
  • Wax: the same question. For refined paraffin, soy or rapeseed wax the answer should be none.
  • Jars, tins, lids, wicks and reeds: an Article 33 declaration stating whether any Candidate List substance is above 0.1% by weight of the article, and the SCIP number if one is.
  • Every declaration: which version of the list it refers to. An "SVHC-free" certificate is only as current as the list it was checked against.

The official source is ECHA's Candidate List table, with a plain summary of the duties that follow from it.

Molekule reads every component from your fragrance's safety data sheet and checks it against ECHA's live classifications, so an ingredient like BMHCA shows up in your candle's classification at the load you choose. Check your fragrance components in Molekule.