← Tools

Flash point to CLP flammability

Enter a liquid's flash point (and initial boiling point) to get its CLP flammable liquid category, hazard statement, signal word and pictogram.

Use the closed-cup flash point from section 9 of the safety data sheet. The boiling point only matters below 23 °C.

CLP Annex I, Table 2.6.1

Category Criteria H Signal word
Flam. Liq. 1 Flash point < 23 °C and initial boiling point ≤ 35 °C H224 Danger
Flam. Liq. 2 Flash point < 23 °C and initial boiling point > 35 °C H225 Danger
Flam. Liq. 3 Flash point ≥ 23 °C and ≤ 60 °C H226 Warning

Above 60 °C: not classified as a flammable liquid. All three categories carry the GHS02 flame pictogram.

How it applies to scented products

  • Reed diffusers, room sprays and fragrance oils are liquids, so the table applies to the flash point of the finished mixture.
  • Candles and wax melts are solids: the flammable liquid class does not apply to the finished product, even when the fragrance oil itself is Flam. Liq. 3.
  • Aerosol sprays are classified in the separate aerosols class (Aerosol 1, 2 or 3), not by the flash point of their contents.
  • CLP requires a closed-cup method to determine the flash point.

GHS02 →

Based on CLP Annex I section 2.6. A mixture's flash point should be measured, or reliably calculated, for the mixture itself.

Find out which pictograms your product needs.

See plans