Almost every "clean", "white musk" or "fresh laundry" candle owes its soft, skin-like base to a synthetic musk. Natural musk from the musk deer hasn't been a realistic ingredient for decades, so perfumers use three families of lab-made molecules instead. They smell similar. Their regulatory status is very different, and one of them is about to change a lot of candle labels.

Why musks are in so many fragrances

Musks are large, heavy molecules that evaporate slowly. That makes them fixatives: they sit at the bottom of a fragrance, hold the lighter notes back and keep the scent going long after the citrus top has gone. In a candle they also carry the "clean skin" character people describe as cosy or soft. That's why a musk often makes up a large share of a white-musk or cotton fragrance oil, not a trace.

There's an odd twist: not everyone can smell them. Specific anosmia to musks is well documented. In the 1970s Amoore's group found that about 7% of the people they tested couldn't smell the macrocyclic musk pentadecalactone. A 2024 study in Chemical Senses (Emter et al.) traced much of this to a variant of the musk receptor OR5A2: people with two copies are roughly 40 to 60 times less sensitive to the musks that receptor detects, polycyclic musks such as galaxolide included, and the authors estimate about 6% of Europeans are in that group. So some of your customers will smell almost nothing from the musk in a candle. The label still has to account for it.

Nitro musks: the old generation

The first synthetic musks were nitro compounds. Two matter today:

  • Musk xylene (CAS 81-15-2): harmonised classification Expl. 1.1, Carc. 2 (H351), Aquatic Acute 1 and Aquatic Chronic 1. It was the first substance put on the REACH Candidate List of substances of very high concern, in October 2008, as very persistent and very bioaccumulative (vPvB). It was then added to the REACH Authorisation List (Annex XIV) with a sunset date of 21 August 2014, so it can't be used in the EU without an authorisation. IFRA has prohibited it as a fragrance ingredient since its 44th Amendment (2009).
  • Musk ketone (CAS 81-14-1): harmonised Carc. 2 (H351), Aquatic Acute 1 and Aquatic Chronic 1. It isn't banned. IFRA allows it under a specification (it must contain less than 0.1% musk xylene as an impurity), and the EU Cosmetics Regulation restricts it in its Annex III.

You're unlikely to find either in a modern candle fragrance. If an SDS does list musk ketone, note that Carc. 2 has a 1% generic limit: at 1% or more in the finished candle it adds the health hazard pictogram and H351 "Suspected of causing cancer". For more on the SVHC side, see our guide to the SVHC Candidate List for candle makers.

Polycyclic musks: galaxolide and tonalide

Polycyclic musks replaced the nitro musks and are still the workhorses of cheap, clean-smelling fragrances. We checked ECHA's records on 29 September 2026:

  • Galaxolide (HHCB) (EC 214-946-9, CAS 1222-05-5, index 603-212-00-7): harmonised Aquatic Acute 1 (H400) and Aquatic Chronic 1 (H410), with no M-factor listed, so an M-factor of 1 applies.
  • Tonalide (AHTN) (EC 244-240-6, CAS 21145-77-7): no harmonised classification. ECHA's prominent industry entry is Acute Tox. 4 (H302, harmful if swallowed) and Aquatic Acute 1 (H400), and some notifiers also self-classify it Aquatic Chronic 1.

Galaxolide is the one to watch. In January 2025 France proposed adding a reproductive toxicity classification, and on 25 March 2026 ECHA's Risk Assessment Committee concluded it should be classified Repr. 1B (may damage the unborn child). France's ANSES also notes that galaxolide is suspected of PBT properties and that assessment is ongoing. The RAC opinion isn't law yet. It becomes binding when the European Commission adds it to CLP Annex VI through an adaptation (ATP), usually with a transition period. We'll come back to what that means below.

Macrocyclic musks: cleaner, not label-free

Macrocyclic musks are ring-shaped ketones and lactones closer in structure to natural musk. Muscone is the classic example, and ethylene brassylate and habanolide are common in modern oils. They're generally seen as the better environmental choice, but "better" doesn't mean nothing on the label. ECHA shows no harmonised classification for any of the three, and the prominent industry self-classifications vary:

  • Ethylene brassylate (CAS 105-95-3): Aquatic Chronic 3 (H412).
  • Habanolide (CAS 111879-80-2): Aquatic Acute 1 and Aquatic Chronic 1.
  • Muscone (3-methylcyclopentadecanone, CAS 541-91-3): Aquatic Chronic 1.

So swapping galaxolide for a macrocyclic musk can lower the aquatic hazard, or not, depending on which one. Always read what your supplier's SDS declares.

A worked example: white-musk candle at 10%

Take a hypothetical white-musk fragrance oil whose SDS lists 15% galaxolide and 10% ethylene brassylate, poured into a container candle at a 10% load. The finished candle holds 1.5% galaxolide and 1.0% ethylene brassylate.

Aquatic hazards are added together with CLP's summation method (our post on M-factors and aquatic toxicity walks through it):

  • Aquatic Chronic 2 (H411, pictogram)? Needs 10 × galaxolide to reach 25%. 10 × 1.5% = 15%. No.
  • Aquatic Chronic 3 (H412)? Needs 100 × galaxolide + ethylene brassylate to reach 25%. 150% + 1% = 151%. Yes.

The candle is H412 "Harmful to aquatic life with long lasting effects", with P273 and P501, and no pictogram and no signal word. Galaxolide alone keeps it at H412 down to a load of about 1.7%, so any realistic load of this oil gives H412. It only tips into H411 with the environment pictogram at a load of about 17%. Ethylene brassylate barely moves the result.

Now the Repr. 1B opinion. If it enters Annex VI as proposed, the generic limit for Repr. 1B in a mixture is 0.3%. At 1.5% galaxolide, the same candle would become Repr. 1B: health hazard pictogram, "Danger" and H360. To stay under 0.3% you'd need a load below 2% with this oil, which isn't a scented candle. It could also bring galaxolide under REACH's restriction on reprotoxic substances in mixtures sold to the public (Annex XVII, entry 30) once it's added to that entry's appendix. The pattern is the same one we covered for the Lilial ban: a CMR classification turns a labelling detail into a reformulation deadline.

What to do now

  • Find your musks. Check Section 3 of every musk, cotton or "clean" fragrance SDS for galaxolide (HHCB, CAS 1222-05-5) and its percentage.
  • Don't drop H412 because the candle smells mild. Aquatic classification doesn't care how strong the scent is, or whether your customer can smell the musk at all.
  • Ask suppliers about galaxolide-free versions. Many houses are already reformulating. Check the new SDS, because the replacement musk has its own classification.

Molekule reads each musk from your fragrance SDS, checks it against ECHA's live classifications, runs the summation for your load and tells you exactly which statements your candle needs. Check your musk fragrances in Molekule.